logo

EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111

EZHOU ANJEKA TECHNOLOGY CO.,Ltd Προφίλ εταιρείας
προϊόντα
Σπίτι > προϊόντα > Ενυδατικός και διασκορπιστικός παράγοντας > Anjeka 6915 Monofunctional Deflocculating Wetting And Dispersing Additive For Automotive Paints

Anjeka 6915 Monofunctional Deflocculating Wetting And Dispersing Additive For Automotive Paints

Λεπτομέρειες για το προϊόν

Τόπος καταγωγής: Κίνα

Μάρκα: Anjeka

Πιστοποίηση: ISO9001-2015

Αριθμό μοντέλου: Anjeka6915

Όροι πληρωμής και αποστολής

Ποσότητα παραγγελίας min: 25 κιλά

Συσκευασία λεπτομέρειες: 25kg/τυμπανο;180kg/τυμπανο

Χρόνος παράδοσης: 3-5 ΗΜΕΡΕΣ

Όροι πληρωμής: L/C, T/T, Western Union

Δυνατότητα προσφοράς: 200 τόνους/μήνα

Βρείτε την καλύτερη τιμή
Λεπτομέρειες για το προϊόν
Επισημαίνω:
Εμφάνιση:
Κίτρινο διαφανές υγρό
Αξία οξέος (mg KOH/g):
35-75
Χημική σύνθεση::
Διάλυμα άλατος αλκυλαμμωνίου ενός όξινου συμπολυμερούς που περιέχει λειτουργικές ομάδες υδροξυλίου.
Αξία αμινών (mg KOH/g):
10-300
Ενεργό περιεχόμενο (%):
40
Διάρκεια ζωής:
2 έτη όταν φυλάσσεται σε δροσερό και ξηρό μέρος
Διαλυτικό μέσο:
Προσαρμόσιμο
Εμφάνιση:
Κίτρινο διαφανές υγρό
Αξία οξέος (mg KOH/g):
35-75
Χημική σύνθεση::
Διάλυμα άλατος αλκυλαμμωνίου ενός όξινου συμπολυμερούς που περιέχει λειτουργικές ομάδες υδροξυλίου.
Αξία αμινών (mg KOH/g):
10-300
Ενεργό περιεχόμενο (%):
40
Διάρκεια ζωής:
2 έτη όταν φυλάσσεται σε δροσερό και ξηρό μέρος
Διαλυτικό μέσο:
Προσαρμόσιμο
Περιγραφή του προϊόντος
GENERAL DESCRIPTION
Anjeka-6915 is a wetting and dispersing additive used to reduce viscosity in mineral-filled systems for amine-promoted unsaturated polyester, vinyl ester, and polyurethane resin systems, as well as adhesives. Due to its hydroxyl functional groups, it can be incorporated into the polymer matrix. Not suitable for cobalt-promoted unsaturated polyester resins.
 
PRODUCT DATA
Chemical composition: Alkylammonium salt solution of an acidic copolymer containing hydroxyl functional groups.
Typical physical and chemical data:
The data given on this data sheet are typical values and are not technical specifications of the
product.
Appearance Yellow transparent liquid
Acid value (mg KOH/g) 35-75
Amine value (mg KOH/g) 5-30
Density (23°C, g/cm³) 0.95-1.15
Viscosity (25°C, cps) 10-300
Active content (%) 40
Solvent customizable
 
STORAGE and TRANSPORT
Storage time is not recommended to exceed 12 months.
 
SPECIAL NOTES
The product should be stored in closed containers. Once pre-diluted, it should not be stored further.
 
APPLICATION GUIDELINES

Thermoset Plastics

Features & Benefits

Anjeka-6915 is a monofunctional deflocculating wetting and dispersing additive for mineral-filled amine-promoted polyester putty formulations, as well as epoxy, acrylic, and polyurethane resins. It improves the wetting and dispersion speed of fillers during the dispersion process, reduces viscosity, and enables higher filler loading. Higher filler content improves the sandability of polyester putty formulations during application and after curing. This additive significantly increases gel time in cobalt-promoted unsaturated resins. It is suitable for various polyurethane resin-filled systems. Due to its hydroxyl functional groups, which allow it to be incorporated into the polymer matrix, it is particularly suitable for polyurethane resin systems that must meet stringent fogging and emission requirements (e.g., automotive applications).

 
RECOMMENDED LEVELS

Additive dosage (as supplied) based on filler:

Unsaturated polyester putty formulations 0.5-1.5%

Polyurethane resin systems 0.5-2%

Epoxy systems 0.5-2%

Acrylate systems 0.5-2%

The above levels are for guidance. The optimum dosage should be determined through a series of application-related tests.

 
INCORPORATION AND PROCESSING INSTRUCTIONS

For best performance, the additive should be added to the resin mixture before homogenization and before the fillers are introduced.

 

PACKAGING
-25kg iron drum with inner coating
-180 kg plastic drum with hoop
 

Our service:

1. Respond to inquiries within 24 hours.

2. Superior quality products at competitive prices.

3. Strong R&D and technical support.

4. Dedicated professional team service.

5. Flexible customized production for various packaging options.

6. On-time delivery with no delays.

 

Our team:

Anjeka 6915 Monofunctional Deflocculating Wetting And Dispersing Additive For Automotive Paints 0We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity

of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

 

 

Benefits to our customers and partners:

Stable large-scale production with enhanced quality control

Lower unit production cost

 

Collaboration Opportunities:

Contract manufacturing

OEM / ODM partnerships

 

Anjeka 6915 Monofunctional Deflocculating Wetting And Dispersing Additive For Automotive Paints 3 

Our Certifcate&Patents

Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 2Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 3

Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 4Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 4Titanium dioxide inorganic dispersant paint dispersing agent wetting and dispersing agent 6

 

 

 

 

Τα Προϊόντα μας
Παρόμοια προϊόντα