logo

EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111

EZHOU ANJEKA TECHNOLOGY CO.,Ltd Προφίλ εταιρείας
προϊόντα
Σπίτι > προϊόντα > Ενυδατικός και διασκορπιστικός παράγοντας > Wetting And Dispersing Agent Additive Improves The Flow Of The Mixture In Solvent-free High-solid Epoxy Systems

Wetting And Dispersing Agent Additive Improves The Flow Of The Mixture In Solvent-free High-solid Epoxy Systems

Λεπτομέρειες για το προϊόν

Τόπος καταγωγής: Κίνα

Μάρκα: Anjeka

Πιστοποίηση: ISO9001-2015

Αριθμό μοντέλου: Anjeka6911

Όροι πληρωμής και αποστολής

Ποσότητα παραγγελίας min: 25 κιλά

Τιμή: According to the quantity

Συσκευασία λεπτομέρειες: 25 κιλά/τύμπανο

Όροι πληρωμής: Western Union, T/T

Βρείτε την καλύτερη τιμή
Λεπτομέρειες για το προϊόν
Επισημαίνω:

solvent-free wetting dispersing agent

,

high-solid epoxy dispersing additive

,

flow improvement wetting agent

Εμφάνιση::
κίτρινο υγρό
Αξία οξέος (mg KOH/g):
130-230
Πυκνότητα g/cm³ (23°C):
1.00-1.30
Ιξώδες cps (25℃):
300-3000
Δραστικό συστατικό (%)::
100
Χημική Σύνθεση:
Μείγματα συμπολυμερών που περιέχουν όξινες ομάδες
Συνιστώμενα επίπεδα:
0,5%-1%
Εφαρμογή setcor:
συστήματα με διαλύτες και χωρίς διαλύτες για τη σταθεροποίηση ανόργανων χρωστικών
Εμφάνιση::
κίτρινο υγρό
Αξία οξέος (mg KOH/g):
130-230
Πυκνότητα g/cm³ (23°C):
1.00-1.30
Ιξώδες cps (25℃):
300-3000
Δραστικό συστατικό (%)::
100
Χημική Σύνθεση:
Μείγματα συμπολυμερών που περιέχουν όξινες ομάδες
Συνιστώμενα επίπεδα:
0,5%-1%
Εφαρμογή setcor:
συστήματα με διαλύτες και χωρίς διαλύτες για τη σταθεροποίηση ανόργανων χρωστικών
Περιγραφή του προϊόντος

ANJEKA-6911 Wetting and dispersing agent for unsaturated polyester and epoxy system

GENERAL DESCRIPTION

Anjeka-6911 is a wetting and dispersing additive for unsaturated polyester and epoxy systems that stabilizes inorganic pigments, especially titanium dioxide, and significantly reduces the viscosity and improves the flow of the mixture.

PRODUCT DATA

Chemical composition: Copolymer blends containing acidic groups

Typical physical and chemical data:

The data given on this data sheet are typical values and are not product specifications.

Appearance: Yellow liquid

Acid value (mg KOH/g): 130-230

Density g/cm³ (23°C): 1.00-1.30

Viscosity cps (25℃): 300-3000

Active ingredient (%): 100

STORAGE and TRANSPORT

Delamination or turbidity may occur at temperatures below 10℃, and can be recovered by heating to 30℃-40℃.

Storage time is not recommended to exceed 12 months.

APPLICATION SECTORS

This additive is recommended for solvent-borne and solvent-free systems to stabilize inorganic pigments, especially titanium dioxide. Anjeka-6911 stabilizes inorganic pigments, especially titanium dioxide, and effectively reduces system viscosity, improves system fluidity, increases gloss and reduces haze.

RECOMMENDED LEVELS

Dosage of additives: (W/W) Based on inorganic filler or pigment 0.5%-1%.

The above data are empirical, the optimal amount should be determined through a series of tests.

INCORPORATION AND PROCESSING INSTRUCTIONS

For best performance, add the dispersant to the resin first and then add the filler or pigment.

PACKAGING

  • 25kg iron drum with inner coating
  • 200kg ring plastic drum

Our service:

1 Custom Solutions Tailored additive solutions for your specific coating/ink system.
2 Problem Solving Expert in fixing floating, pinholes, settling, leveling issues.
3 Performance Boost Enhances stability, gloss, durability for competitive edge.
4 Cost Efficiency Optimizes dosage and process to reduce total costs.
5 Full Support End-to-end technical partnership from lab to production.

Our team:

Wetting And Dispersing Agent Additive Improves The Flow Of The Mixture In Solvent-free High-solid Epoxy Systems  0

Our company:

Wetting And Dispersing Agent Additive Improves The Flow Of The Mixture In Solvent-free High-solid Epoxy Systems  1

Wetting And Dispersing Agent Additive Improves The Flow Of The Mixture In Solvent-free High-solid Epoxy Systems  2

Wetting And Dispersing Agent Additive Improves The Flow Of The Mixture In Solvent-free High-solid Epoxy Systems  3

We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity

of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

Benefits to our customers and partners:

  • Stable large-scale production with enhanced quality control
  • Lower unit production cost

Collaboration Opportunities:

  • Contract manufacturing
  • OEM / ODM partnerships

Our Certifcate&Patents

Wetting And Dispersing Agent Additive Improves The Flow Of The Mixture In Solvent-free High-solid Epoxy Systems  4

Τα Προϊόντα μας
Παρόμοια προϊόντα