EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
Λεπτομέρειες για το προϊόν
Τόπος καταγωγής: Κίνα
Μάρκα: Anjeka
Πιστοποίηση: ISO9001-2015
Αριθμό μοντέλου: Ανέκα6910
Όροι πληρωμής και αποστολής
Ποσότητα παραγγελίας min: 25 κιλά
Συσκευασία λεπτομέρειες: 25 κιλά/τύμπανο
Χρόνος παράδοσης: 3-5 ΗΜΕΡΕΣ
Όροι πληρωμής: L/C,D/P,T/T,Western Union
Δυνατότητα προσφοράς: 100 τόνοι/μήνα
Τομέας εφαρμογής: |
κόλλα, μελάνι εκτύπωσης, επίστρωση με βάση το νερό |
Αρμονία: |
Συμβατό με τις περισσότερες ρητίνες και χρωστικές ύλες |
Ιξώδες cps (25°C): |
250-450 |
Δραστικό συστατικό (%): |
100 |
Πυκνότητα g/cm³ (23°C): |
1,13-1,23 |
Τιμή οξέος (mg KOH/g):: |
150-250 |
δείγμα: |
Διατίθεται κατόπιν αιτήματος |
Διαλυτικό μέσο: |
Κανένας |
Περιγραφή: |
ανόργανος παράγοντας διαβροχής πληρωτικού |
Τομέας εφαρμογής: |
κόλλα, μελάνι εκτύπωσης, επίστρωση με βάση το νερό |
Αρμονία: |
Συμβατό με τις περισσότερες ρητίνες και χρωστικές ύλες |
Ιξώδες cps (25°C): |
250-450 |
Δραστικό συστατικό (%): |
100 |
Πυκνότητα g/cm³ (23°C): |
1,13-1,23 |
Τιμή οξέος (mg KOH/g):: |
150-250 |
δείγμα: |
Διατίθεται κατόπιν αιτήματος |
Διαλυτικό μέσο: |
Κανένας |
Περιγραφή: |
ανόργανος παράγοντας διαβροχής πληρωτικού |
Anjeka-6910 is a wetting and dispersing agent designed for unsaturated polyester and epoxy systems. It effectively stabilizes inorganic pigments, particularly titanium dioxide, significantly reducing the viscosity of the mixture and improving flow characteristics.
| Parameter | Value |
|---|---|
| Chemical Composition | Copolymer mixture with acidic groups, solvent-free |
| Appearance | Yellow fluid |
| Acid Value (mgKOH/g) | 150-250 |
| Density (g/cm³ at 23℃) | 1.13-1.23 |
| Viscosity (cps at 25℃) | 250-450 |
| Non-volatile Content (%) | 98 |
Note: The data provided represents typical values and not specific technical specifications.
Possible stratification or turbidity may occur at temperatures below 10℃, and recovery can be achieved by heating to 30℃-40℃. Recommended storage time does not exceed 12 months.
This additive is advised for application in both solvent-based and solvent-free systems, imparting stability to inorganic pigments, particularly titanium dioxide. It efficiently decreases system viscosity, thereby improving flow characteristics.
Additive Levels: 0.5%-1% (W/W) based on inorganic fillers or pigments
The above data represents empirical levels; the optimal quantity should be determined through a series of experiments.
For optimal performance, introduce the dispersing agent into the resin, mix thoroughly, and then add fillers or pigments.
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Our Certifcate&Patents