EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
Λεπτομέρειες για το προϊόν
Τόπος καταγωγής: Κίνα
Μάρκα: Anjeka
Πιστοποίηση: ISO9001-2015
Αριθμό μοντέλου: Αντζέκα5052
Όροι πληρωμής και αποστολής
Ποσότητα παραγγελίας min: 25 κιλά
Συσκευασία λεπτομέρειες: 25kg/τυμπανο;180kg/τυμπανο
Χρόνος παράδοσης: 3-5 ΗΜΕΡΕΣ
Όροι πληρωμής: L/C,T/T,Western Union
Δυνατότητα προσφοράς: 200 τόνους/μήνα
Εμφάνιση: |
Διαυγές υγρό |
Εφαρμογή: |
Χρησιμοποιείται ως αποφουσκωτικό σε διάφορες βιομηχανίες |
Αρμονία: |
Συμβατό με τις περισσότερες πρόσθετες ύλες |
Σταθερότητα: |
Σταθερό υπό κανονικές συνθήκες |
Τομείς Εφαρμογών: |
Βιομηχανικές επικαλύψεις: |
Όνομα προϊόντος: |
μη αποσφουγγαριστής σιλικόνης |
Εμφάνιση: |
Διαυγές υγρό |
Εφαρμογή: |
Χρησιμοποιείται ως αποφουσκωτικό σε διάφορες βιομηχανίες |
Αρμονία: |
Συμβατό με τις περισσότερες πρόσθετες ύλες |
Σταθερότητα: |
Σταθερό υπό κανονικές συνθήκες |
Τομείς Εφαρμογών: |
Βιομηχανικές επικαλύψεις: |
Όνομα προϊόντος: |
μη αποσφουγγαριστής σιλικόνης |
Anjeka-5052 is a defoamer designed for use in both solvent-based and solvent-free systems, free from organic silicon.
Chemical Composition: Solution of defoaming polymer without organic silicon.
Note: The values provided on this data sheet are typical and not technical specifications of the product.
| Appearance: | Clear liquid |
| Solvent: | Xylene |
| Non-volatile Content %: | 20 |
Possible stratification and turbidity may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly before use. Store in a cool, dry place. Storage time is not recommended to exceed 12 months.
Due to its strong incompatibility, an assessment must be made in non-polar systems regarding its impact on the transparency of clear lacquer systems and the occurrence of craters.
For Industrial Coatings
Anjeka5052 demonstrates robust defoaming capabilities while maintaining favorable intercoat adhesion during recoating.
With greater incompatibility than Anjeka5051, Anjeka5052 is widely employed as a standard defoamer in numerous solvent-based coatings. It excels in defoaming, particularly in non-polar systems.
0.1-1.0% additive levels (as purchased) based on the total formulation. The above values are empirical; optimal levels should be determined through a series of experiments.
For optimal performance, the defoamer should be added to the grinding material before milling. If added at a later stage, sufficient shear force is necessary to ensure good dispersion and prevent cratering.
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
![]()
![]()
![]()
We are building a new large-scale production base strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
![]()
![]()
![]()
![]()
![]()