Anjeka6162A high pigment carbon black dispersant excellent color development for various carbon blacks

GENERAL DESCRIPTION

Anjeka-6162A is a high polymer polyurethane type high efficient carbon black dispersant with excellent dispersing performance for various high color carbon blacks such as FW200.

PRODUCT DATA

Chemical composition: High molecular weight block copolymer solution containing pigment affinity groups.

Typical Physical and Chemical Data:

The data given on this data sheet are typical values and are not technical specifications of the product.

Appearance Yellow liquid

Acid value (mg KOH/g) 1-15

Amine value (mg KOH/g) 1-20

Density g/cm³ (23°C) 1.10-1.20

Active ingredient (%) 100

STORAGE and TRANSPORT

Delamination or turbidity may occur at temperatures below 15 °C. Heat to 20 °C and mix thoroughly.

Storage is not recommended for more than 12 months.

SPECIAL NOTES

The surface treatment of some organic pigments may adversely affect the effectiveness of this wetting and dispersing additive. In such cases, untreated pigments of the same type may be used. This product is suitable for medium to high polarity systems and should be tested for dispersion stability in medium to low polarity systems.

APPLICATION GUIDELINES

Coatings Industry

Properties and Advantages.

This high molecular weight additive unflocculates and stabilizes the pigment by spatial site resistance.Anjeka-6162A provides the same charge to the pigment particles. The resulting repulsive and site-stabilizing effect prevents possible co-flocculation and prevents color float and bloom in multi-color systems. The deflocculation properties of the additive increase the gloss, color strength, transparency and hiding power of the coating while reducing the viscosity of the abrasive.

APPLICATION SECTORS

Industrial Coatings ●

Automotive coatings ●

Coil coatings

Anti-corrosion coating systems

●--Special Recommendations; ○--Recommendations

RECOMMENDED LEVELS

The amount of additives (in purchased form) is based on the pigment:

Inorganic pigments: 5%-15

Organic pigments: 10%-90

Carbon black: 50%-140

The above data are empirical, the optimum dosage should be determined through a series of tests.

INCORPORATION and PROCESSING INSTRUCTIOS

In order to obtain the best performance, the additives should be added to the abrasive before the pigments.

PACKAGING

-25kg iron drum with inner coating

-180kg ring plastic drum

Our service:

1. Respond to inquiries within 24 hours.

2. Superior quality products at competitive prices.

3. Strong R&D and technical support.

4. Dedicated professional team service.

5. Flexible customized production for various packaging options.

6. On-time delivery with no delays.

Our team:

We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity

of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

Benefits to our customers and partners:

Stable large-scale production with enhanced quality control

Lower unit production cost

Collaboration Opportunities:

Contract manufacturing

OEM / ODM partnerships