Επισημαίνω:
water-based wetting dispersing additive
, high molecular weight copolymer solution
, dispersing agent for color pastes
GENERAL DESCRIPTION
ANJEKA-6630 is a polymer wetting and dispersing additive for aqueous coatings, printing inks and adhesives. It is a standard additive for resin-free pigment concentrates. It is suitable for inorganic and organic pigments and carbon black, and belongs to efficient and economical general-purpose aqueous polymer dispersant.
PRODUCT DATA
Chemical composition: High molecular weight copolymer solution containing pigment affinity groups.
Typical Physical Chemistry Data:
The data given on this data sheet are typical values and are not technical specifications of the product.
| Appearance: |
yellow liquid |
| Acid Value (mgKOH/g): |
10 - 30 |
| Amine Value (mgKOH/g): |
70-90 |
|
Active ingredient (%):
|
30 |
| Solvent: |
water |
STORAGE and TRANSPORT
When stored or transported at temperatures below 0°C, delamination or turbidity may occur. Heat to 20°C and stir before use.
Storage time is not recommended to exceed 12 months.
APPLICATION GUIDELINES
Coating Industry
Properties and Advantages.
This additive causes pigment deflocculation by spatial stabilization. Due to the small particle size of the deflocculated pigments, a high gloss can be achieved, as well as an increase in color strength. In addition, the transparency of transparent pigments and the hiding power of opaque pigments are improved. Due to the reduced viscosity, the flow properties are improved and the pigment content can be increased.
The additive is particularly suitable for the production of stable, resin-free pigment concentrates with a pigment content of 30-60%. These pigment concentrates can be used for paint mixing with standard aqueous bases such as acrylic dispersions or water-soluble acrylic resins as well as acrylic emulsions.
APPLICATION SECTORS
Industrial coatings ●
Automotive coatings ●
Leather coatings ●
Anti-corrosion coating systems ●
Water-based adhesives ●
●--Special recommendation; ○--Recommendation
This additive is also recommended for the production of stabilized resin-free pigment concentrates for the preparation of waterborne coatings with no floating/blooming colors.
RECOMMENDED LEVELS
Additive dosage (in purchased form) is based on pigment:
Titanium dioxide and inorganic pigments: 4% - 10%.
Organic pigments: 30%-90
Carbon black: 50%-140
The above figures are empirical and the optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
Grinding can be carried out in water and co-solvent, mixing the additives with water, and then adding pigments only after the additives are well dispersed.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
Our Certifcate&Patents
Το μήνυμά σας πρέπει να αποτελείται από 20-3.000 χαρακτήρες!
