EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
Λεπτομέρειες για το προϊόν
Τόπος καταγωγής: Κίνα
Μάρκα: Anjeka
Πιστοποίηση: ISO9001-2015
Αριθμό μοντέλου: Ανέκα6042
Όροι πληρωμής και αποστολής
Ποσότητα παραγγελίας min: 25 κιλά
Συσκευασία λεπτομέρειες: 25 κιλά/τύμπανο
Χρόνος παράδοσης: 3-5 ΗΜΕΡΕΣ
Όροι πληρωμής: L/C,D/P,T/T,Western Union
Δυνατότητα προσφοράς: 100 τόνοι/μήνα
Εμφάνιση: |
Ανοικτό κίτρινο έως καφετί υγρό |
Αξία οξέος: |
(mg ΚΟΗ/g) 2-40 |
Τιμή αμίνης: |
(mg ΚΟΗ/g) 2-40 |
Πυκνότητα: |
00,80-1,00 g/cm3 |
Ιξώδες cps: |
(25℃) 100-1000 |
Δραστικό Συστατικό: |
50% |
Διαλυτικό μέσο: |
Λευκό μεταλλικό έλαιο |
Όνομα προϊόντος: |
Πολυμερικό Dispersan |
Εμφάνιση: |
Ανοικτό κίτρινο έως καφετί υγρό |
Αξία οξέος: |
(mg ΚΟΗ/g) 2-40 |
Τιμή αμίνης: |
(mg ΚΟΗ/g) 2-40 |
Πυκνότητα: |
00,80-1,00 g/cm3 |
Ιξώδες cps: |
(25℃) 100-1000 |
Δραστικό Συστατικό: |
50% |
Διαλυτικό μέσο: |
Λευκό μεταλλικό έλαιο |
Όνομα προϊόντος: |
Πολυμερικό Dispersan |
Polymeric Dispersant dispersing pigments in low-polarity solvent-based coatings and printing inks
A polymeric dispersant for dispersing pigments in low-polarity coatings.
The data provided in this datasheet are typical values and are not product specifications.
Stir well before use. Stratification or cloudiness may occur below 0°C. Heat to 30°C-40°C and mix evenly.
Helps improve gloss, color intensity, and anti-flocculation properties of organic pigments, reducing haze caused by uneven dispersion. Particularly effective in dispersing high-surface-area carbon black, enhancing the blackness of coatings. This product also helps shorten grinding time, increase production efficiency, and improve the storage stability of coatings.
This additive is recommended for dispersing pigments in low-polarity solvent-based coatings and in printing inks, especially for stabilizing organic pigments like carbon black. This product is compatible with many resins used in coatings, such as polyester, polyurethane, and acrylic resin systems.
Additive dosage (as supplied) based on pigment:
The above data are empirical dosages. The optimal dosage should be determined through a series of tests.
For optimal performance, the additive should be added to the grinding base before the pigment is introduced.
![]()
![]()
![]()
![]()
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.